This is the larger of three table homemade saw sleds I use in my shop. I call it the “Mega Sled” because it will do it all including crosscutting large panels and cutting various types of joinery.
It includes plans for a clever system of joinery jig attachments including a finger joint jig, a pair of dovetail jigs, a tenon-cutting jig, a jig for cutting spline slots to reinforce frames and boxes, and spring activated micro-adjusters to fine tune your cuts. It is by far the most capable table saw sled system around!
This large sled will work on any contractor’s table saw or cabinet saw. It will also work on many portable jobsite saws. It may be too large for some small benchtop saws. We offer a smaller version of this sled, complete with all the same attachments in our web store.
You may also purchase this sled, our smaller version (for day-to-day work) and our special miter sled (for 45-degree frames and boxes) as a set at a discounted rate in the “table saw jigs” catagory of our project plans store.
- Deluxe PDF Plans (Dimensions, cut list, drawings, build photos and step by step instructions)
- Dimensions: Inches
- Tools required: Table saw, pneumatic nailer, drill, router
Mega Sled Overview:
Jig Attachments Overview:
How to use the finger joint jig attachment:
How to use the tenon jig attachment:
How to use the dovetail jig attachments:
How to make and adjust the runners:
More about our deluxe plans:
Our deluxe project plans are more than just a set of dimensions. They include a comprehensive set of step-by-step instructions with dozens of photos and illustrations to walk you thorough the build.
You will NOT receive a paper plan. You will be sent a link to download a digital PDF document that is compatible with most computers and digital devices. You may print it yourself or take it to a printing service. We do not provide 3D Sketchup models or CNC G-code.
Below are some examples of what our deluxe project plans look like. This plan will be similar.
Returns and ExchangesThere are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.
- You have 14 calendar days to return an item from the date you received it.
- Only items that have been purchased directly from Us.
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to UsFirstly Print and return this Returns Form to: 30 South Park Avenue, San Francisco, CA 94108, USA Please remember to ensure that the item you are returning is repackaged with all elements. For more information, view our full Returns and Exchanges information.
A mini cyclone designed to keep your filter clean and your vacuum working hard! There are commercial versions on the market, but ours is easy and inexpensive to make, and will mount directly on your vacuum so you don't have to pull a separate bucket around. Vacuum surgery is optional, and we walk you through the whole thing! This project was featured on episodes 51 & 52 of "The Stumpy Nubs Workshop".
This amazingly accurate and versatile router table fence is patterned after the very expensive Incra LS system. It features a set of interlocking teeth creating positive stops every 1/16". You can't miss your mark even by the tiniest fraction of in inch! And when combined with Stumpy's "sliding router table" you can create precise joinery! It also works on any router table and is the most accurate homemade router fence out there.
Every workshop should have at least one saw bench. Not only is this an indispensable tool for sawing, it’s also a comfortable and portable workspace for chopping, boring and all sorts of other tasks. This version of the classic saw bench includes some extra features. For one thing, there’s a split that runs down the center to support both sides of the board while you rip down its length. There are holes for holdfasts to secure your work while you drill or chop sitting down. And it’s large enough to use as a step stool or an extra seat while shooting the breeze. But the best part is it can be built with some old construction lumber!
Building box/finger joint jigs has become a bit of a hobby among some woodworkers, like marble machines or complex mouse traps. They are admittedly complicated, but fun to build and really useful tools. I've designed several, but this one is my favorite. It will cut any joint configuration you can imagine, without any complicated setup or attachments to swap around. You don't need a dado set to use it, though using one will speed up the process. It will cut a joint up to 18" wide, and is compatible with any 10-inch table saw.
This horizontal router has a few unique twists that make all the difference, like a tilting table, a micro adjustable router lift, a sliding table and much more. The machine is great for making raised panel doors, cutting miters and bevels, making splined miter joints for boxes, locking miter joints, half lap joints, rabbets, tenons... the list goes on and on. Plus it has excellent dust collection, and the tilting table makes it possible to cut unique, one of a kind profiles with ordinary router bits!