This may be the only clamp rack you ever need. It will hold between 20-40 clamps, depending on the type, including F-clamps, parallel clamps, pipe clamps, bar clamps or pistol grip clamps. Set up the rack according to the types you own now. If you get more of a different type later, the rack may be adjusted so you always use the valuable wall space as efficiently as possible. And it only requires a half sheet of plywood!
- Deluxe PDF Plans (Dimensions, cut list, drawings, build photos and step by step instructions)
- Dimensions: Inches (Cut list also includes dimensions in millimeters)
- Tools required: Table saw, pneumatic nailer, drill
More about our deluxe plans:
Our deluxe project plans are more than just a set of dimensions. They include a comprehensive set of step-by-step instructions with dozens of photos and illustrations to walk you thorough the build.
You will NOT receive a paper plan. You will be sent a link to download a digital PDF document that is compatible with most computers and digital devices. You may print it yourself or take it to a printing service. We do not provide 3D Sketchup models or CNC G-code.
Below are some examples of what our deluxe protect plans look like. This plan will be similar.
Returns and ExchangesThere are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.
- You have 14 calendar days to return an item from the date you received it.
- Only items that have been purchased directly from Us.
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to UsFirstly Print and return this Returns Form to: 30 South Park Avenue, San Francisco, CA 94108, USA Please remember to ensure that the item you are returning is repackaged with all elements. For more information, view our full Returns and Exchanges information.
A mini cyclone designed to keep your filter clean and your vacuum working hard! There are commercial versions on the market, but ours is easy and inexpensive to make, and will mount directly on your vacuum so you don't have to pull a separate bucket around. Vacuum surgery is optional, and we walk you through the whole thing! This project was featured on episodes 51 & 52 of "The Stumpy Nubs Workshop".
This drum sander design is unlike anything you've ever seen before! It is a "dual stage" machine, meaning both the top and the bottom of the sanding drum may be used. This enables you to sand any flat work piece to thickness by feeding it through the machine via a hand-cranked feed belt, OR you can pass your work pieces over the top of the machine for fast sanding of flat surfaces and even edges! There isn't another drum sander with this capability ANYWHERE! It's also designed to use inexpensive, easy to find 6" sanding belts, and rather than peeling off the paper to change grits, you swap out the whole drum via a quick-release system!
This amazingly accurate and versatile router table fence is patterned after the very expensive Incra LS system. It features a set of interlocking teeth creating positive stops every 1/16". You can't miss your mark even by the tiniest fraction of in inch! And when combined with Stumpy's "sliding router table" you can create precise joinery! It also works on any router table and is the most accurate homemade router fence out there.
Andre Roubo was among the oldest of the old-timey woodworkers, and the unique drawings found in his eighteenth century book have inspired woodworkers for over 200 years. Stumpy has designed a version of this bench which is by far the easiest, least expensive version to make. You can build one without difficult joinery, and without compromises in strength and features, all from cheap construction lumber! It's big, beefy and full of all the features a hand tool woodworker, or even a power tool woodworker, would appreciate.
Every workshop should have at least one saw bench. Not only is this an indispensable tool for sawing, it’s also a comfortable and portable workspace for chopping, boring and all sorts of other tasks. This version of the classic saw bench includes some extra features. For one thing, there’s a split that runs down the center to support both sides of the board while you rip down its length. There are holes for holdfasts to secure your work while you drill or chop sitting down. And it’s large enough to use as a step stool or an extra seat while shooting the breeze. But the best part is it can be built with some old construction lumber!
I designed a dovetail machine that can be made from wood, and has more features than most of the top of the line commercial versions. This machine is designed to be used with your router to make fast, even, beautiful through dovetail joints that look like you made them by hand. It is micro-adjustable so you can set how tight you want the joint to be, and it allows you to easily change the spacing and size of the tails and pins. It will also make sliding dovetail joints and router dadoes!