If you use a lot of plywood or if you just like to keep a few sheets on hand, this is the project for you! It’s a storage cart that organizes both full and partial sheets. But it also includes a clever feature that holds large panels upright so you may break them down easily with a circular saw and an edge guide. No more carrying and flipping big, heavy sheets around the shop. Do it all right on the storage cart! (I highly recommend the Bora edge guide system to make your cuts.) The whole thing is mobile so you can roll it around and tuck it in a corner. And it’s built from inexpensive construction lumber. This basic plan a dimensioned cut list and simple drawings so you can see how it goes together. I recommend you also watch the free video below for additional tips.
- Basic PDF Plans (dimensions, cut list and basic assembly drawings)
- Dimensions: Inches
- Tools required: Circular saw, drill
You will NOT receive a paper plan. You will be sent a link to download a digital PDF document that is compatible with most computers and digital devices. You may print it yourself or take it to a printing service. We do not provide 3D Sketchup models or CNC G-code.
Returns and ExchangesThere are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.
- You have 14 calendar days to return an item from the date you received it.
- Only items that have been purchased directly from Us.
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to UsFirstly Print and return this Returns Form to: 30 South Park Avenue, San Francisco, CA 94108, USA Please remember to ensure that the item you are returning is repackaged with all elements. For more information, view our full Returns and Exchanges information.
Misc Router Jigs
These two jigs are easy to make, and simple to use. One is for the router table, the other is used with a hand-held router. Both will cut through-dovetail pins (the tails are cut with a band saw, scroll saw or jig saw). The hand-held router jig will also enable you to cut half-blind dovetails as well. Both jigs are demonstrated in the videos below, and there's another video about laying out your joints.
Deluxe Router Table Fence
This amazingly accurate and versatile router table fence is patterned after the very expensive Incra LS system. It features a set of interlocking teeth creating positive stops every 1/16". You can't miss your mark even by the tiniest fraction of in inch! And when combined with Stumpy's "sliding router table" you can create precise joinery! It also works on any router table and is the most accurate homemade router fence out there.
Incremental Tenon Jig
This tenon jig is yet another example of how you can use a homemade incremental positioner in amazing ways! It provides a positive stop every 1/6" (which can be micro-adjusted to the tiniest amount), making it impossible to set up the jig wrong, and making it easy to make many tenons that are all exactly the same size without laying them out individually. The accuracy and repeatability of this jig is unique in any homemade or even store-bought version- just check out the video below to see! But the best part is, it's inexpensive and easy to make using our detailed plans, complete with lots of photos and step-by-step instructions!
Shop Vac Cyclone
A mini cyclone designed to keep your filter clean and your vacuum working hard! There are commercial versions on the market, but ours is easy and inexpensive to make, and will mount directly on your vacuum so you don't have to pull a separate bucket around. Vacuum surgery is optional, and we walk you through the whole thing! This project was featured on episodes 51 & 52 of "The Stumpy Nubs Workshop".
Every workshop should have at least one saw bench. Not only is this an indispensable tool for sawing, it’s also a comfortable and portable workspace for chopping, boring and all sorts of other tasks. This version of the classic saw bench includes some extra features. For one thing, there’s a split that runs down the center to support both sides of the board while you rip down its length. There are holes for holdfasts to secure your work while you drill or chop sitting down. And it’s large enough to use as a step stool or an extra seat while shooting the breeze. But the best part is it can be built with some old construction lumber!
Spring Clamps (free)
These homemade spring clamps are easy to make, and cost almost nothing (assuming you have some scrap wood and rubber bands laying around.) They're great for light duty clamping, and make an excellent project for kids- just be sure to supervise while they use the band saw or scroll saw. The link below will provide you with patterns for a large and small version.
Table Saw Sliding Crosscut Table
The Europeans have had a secret for years- their saws have sliding tops for easy and accurate crosscuts! We can buy attachments for our saws in the US, but they are EXPENSIVE. So why not make your own? This one mounts to the side of your contractor or cabinet saw (for smaller saws, use with the TS Workstation) and includes an adjustable miter fence, even a storage drawer. Great for working with plywood panels!
Compact Drill Press Table
Stumpy's amazing x-y sliding drill press table is a little big for some drill presses, so he got to work on a more compact solution- smaller, easier to build, but still loaded with features, like replaceable inserts, slide out trays for drill bit storage, a unique fence based dust collection system, and a t-style fence locking mechanism.
Router Table Multi-Sled
What started out as a way to safely hold small parts while working at the router table, became a multi-functional sled that will accomplish several tasks safely and accurately. It's a small parts holder: it's a coping sled for routing on the ends of narrow work pieces (rail and stile construction, tenons, half laps, etc.); and it's a circle cutting jig capable of diameters up to 10-inches.
This sled is surprisingly easy to build, and the plans give you all the information you need, including step-by-step instructions complete with photos. Enjoy!
2×6 Roubo Workbench
Andre Roubo was among the oldest of the old-timey woodworkers, and the unique drawings found in his eighteenth century book have inspired woodworkers for over 200 years. Stumpy has designed a version of this bench which is by far the easiest, least expensive version to make. You can build one without difficult joinery, and without compromises in strength and features, all from cheap construction lumber! It's big, beefy and full of all the features a hand tool woodworker, or even a power tool woodworker, would appreciate.