Follow our Facebook page for free woodworking goodness! - Stumpy Nubs Woodworking Journal is a multi-media publication designed for weekend woodworkers of all skill levels. Each issue contains a selection of articles and videos about woodworking techniques (hand and power tools), jigs and shop improvements, unique projects, skill building tutorials, tool reviews and quick tips.
This set includes ALL THREE of our deluxe table saw sled plans, including the large “Mega Sled,” the more compact “Mini Sled,” and the deluxe “Miter Sled”, plus all the joinery jig attachments including a finger joint jig, a pair of dovetail jigs, a tenon-cutting jig, a jig for cutting spline slots to reinforce frames and boxes, and spring activated micro-adjusters to fine tune your cuts. It is by far the most capable table saw sled system around!
NOTE: The three sleds may also be purchased separately in the “table saw jigs” catagory of our project plans store.
Our deluxe project plans are more than just a set of dimensions. They include a comprehensive set of step-by-step instructions with dozens of photos and illustrations to walk you thorough the build.
You will NOT receive a paper plan. You will be sent a link to download a digital PDF document that is compatible with most computers and digital devices. You may print it yourself or take it to a printing service. We do not provide 3D Sketchup models or CNC G-code.
Quick View
Every workshop should have at least one saw bench. Not only is this an indispensable tool for sawing, it’s also a comfortable and portable workspace for chopping, boring and all sorts of other tasks. This version of the classic saw bench includes some extra features. For one thing, there’s a split that runs down the center to support both sides of the board while you rip down its length. There are holes for holdfasts to secure your work while you drill or chop sitting down. And it’s large enough to use as a step stool or an extra seat while shooting the breeze. But the best part is it can be built with some old construction lumber!
Quick View
Traditional workbenches are great! The problem is that planning and project assembly tasks are best done at a low bench, but cutting joinery such as dovetails is more comfortable at a higher bench. Most shops don’t have multiple benches for multiple uses, so we bend down for our dovetailing.
This workstation seeks to solve that problem! When placed on a standard bench top it raises your work up so you can stand erect and work more comfortably. It includes work-holding clamps so it may be used on any work-surface, no vice required. And other clever features, such as a drawer to hold all your dovetailing tools and a replaceable chopping surface, make it very versatile.
Quick View
This tenon jig is yet another example of how you can use a homemade incremental positioner in amazing ways! It provides a positive stop every 1/6" (which can be micro-adjusted to the tiniest amount), making it impossible to set up the jig wrong, and making it easy to make many tenons that are all exactly the same size without laying them out individually. The accuracy and repeatability of this jig is unique in any homemade or even store-bought version- just check out the video below to see! But the best part is, it's inexpensive and easy to make using our detailed plans, complete with lots of photos and step-by-step instructions!
Quick View
This easy to build jig makes it possible to create traditional raised panels on the router table without any special bits. All you need is a simple straight router bit, and the results are quick, easy and repeatable.
Quick View
These two jigs are easy to make, and simple to use. One is for the router table, the other is used with a hand-held router. Both will cut through-dovetail pins (the tails are cut with a band saw, scroll saw or jig saw). The hand-held router jig will also enable you to cut half-blind dovetails as well. Both jigs are demonstrated in the videos below, and there's another video about laying out your joints.
Quick View
This is my version of an idea first presented in Fine Woodworking Magazine (Issue #178) by Richard Beebe. This taper jig works like a sled, securely holding your workpiece and keeping your hands safe throughout the cut, even for narrow tapers, such as chair legs. My version is a little different that his. It adjusts equally from both ends of the fence, and will cut wide panels as well as narrow stock.
Quick View
These homemade spring clamps are easy to make, and cost almost nothing (assuming you have some scrap wood and rubber bands laying around.) They're great for light duty clamping, and make an excellent project for kids- just be sure to supervise while they use the band saw or scroll saw. The link below will provide you with patterns for a large and small version.
Quick View
This rack was created with that in mind. It is designed to evolve with your collection. Not only can you move the bits around, you can also move the holes! This makes it possible to group bits by type, to add more places for 1/4-inch or 1/2-inch shaft bits, and each bit holder is removable so you may keep the bit protected when you take it to your bench or router table. This may be the last bit rack you ever build!
Quick View
This is a great machine for cutting curves and large holes without having to cut from the edge of the work piece like with a band saw. In fact, it can replace a band saw in a budget-minded shop. PLUS, it can cut plastic, metal, even tile! Rockwell calls theirs a Blade-runner, but this one has features that even theirs doesn't have. For one thing, it makes beveled cuts. It has a storage drawer at the bottom, and it can be made from scraps and a cheap saw.
Quick View
If you use a lot of plywood or if you just like to keep a few sheets on hand, this is the project for you! It's a storage cart that organizes both full and partial sheets. But it also includes a clever feature that holds large panels upright so you may break them down easily with a circular saw and an edge guide. No more carrying and flipping big, heavy sheets around the shop. Do it all right on the storage cart! The whole thing is mobile so you can roll it around and tuck it in a corner. And it's built from inexpensive construction lumber.
A truly unique digital publication for the everyday woodworker
support@stumpynubs.com
