This is the every-day user out of of three homemade table saw sleds I have in my shop. I call it the “Mini Sled” because it it is a smaller, easier to pull out and stow away version of the big “Mega Sled” – but it is almost as capable.
It includes plans for a clever system of joinery jig attachments including a finger joint jig, a pair of dovetail jigs, a tenon-cutting jig, a jig for cutting spline slots to reinforce frames and boxes, and spring activated micro-adjusters to fine tune your cuts. It is by far the most capable table saw sled system around!
Note- the dovetail jig attachments are a little large for this sled. They will work, but they will hang off the edge. They work best on the larger version of this sled, which is available in our web store.
You may also purchase this sled, our larger version (for larger work) and our special miter sled (for 45-degree frames and boxes) as a set at a discounted rate in the “table saw jigs” catagory of our project plans store.
- Deluxe PDF Plans (Dimensions, cut list, drawings, build photos and step by step instructions)
- Dimensions: Inches
- Tools required: Table saw, pneumatic nailer, drill, router
Jig Attachments Overview (features larger sled, but the jigs are universal):
How to use the finger joint jig attachment:
How to use the tenon jig attachment:
How to use the dovetail jig attachments (this jig is a little large for this small sled):
How to make and adjust the runners:
More about our deluxe plans:
Our deluxe project plans are more than just a set of dimensions. They include a comprehensive set of step-by-step instructions with dozens of photos and illustrations to walk you thorough the build.
You will NOT receive a paper plan. You will be sent a link to download a digital PDF document that is compatible with most computers and digital devices. You may print it yourself or take it to a printing service. We do not provide 3D Sketchup models or CNC G-code.
Below are some examples of what our deluxe project plans look like. This plan will be similar.
Returns and ExchangesThere are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.
- You have 14 calendar days to return an item from the date you received it.
- Only items that have been purchased directly from Us.
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to UsFirstly Print and return this Returns Form to: 30 South Park Avenue, San Francisco, CA 94108, USA Please remember to ensure that the item you are returning is repackaged with all elements. For more information, view our full Returns and Exchanges information.
Building box/finger joint jigs has become a bit of a hobby among some woodworkers, like marble machines or complex mouse traps. They are admittedly complicated, but fun to build and really useful tools. I've designed several, but this one is my favorite. It will cut any joint configuration you can imagine, without any complicated setup or attachments to swap around. You don't need a dado set to use it, though using one will speed up the process. It will cut a joint up to 18" wide, and is compatible with any 10-inch table saw.
This jig is simple and inexpensive to make, but well thought out to provide a surprising level of functionality. It may be used with a plunge router and an edge guide to create accurate, repeatable mortises. You can cut tricky ones too, such as double mortises, parallel mortises and even mortises in round stock.
Andre Roubo was among the oldest of the old-timey woodworkers, and the unique drawings found in his eighteenth century book have inspired woodworkers for over 200 years. Stumpy has designed a version of this bench which is by far the easiest, least expensive version to make. You can build one without difficult joinery, and without compromises in strength and features, all from cheap construction lumber! It's big, beefy and full of all the features a hand tool woodworker, or even a power tool woodworker, would appreciate.
A mini cyclone designed to keep your filter clean and your vacuum working hard! There are commercial versions on the market, but ours is easy and inexpensive to make, and will mount directly on your vacuum so you don't have to pull a separate bucket around. Vacuum surgery is optional, and we walk you through the whole thing! This project was featured on episodes 51 & 52 of "The Stumpy Nubs Workshop".
Router planes are amazing tools, but they are also largely misunderstood. And that's a shame, because they are extremely useful in both a hand-tool and a power-tool workshop. Rather than cutting profiles, as a modern router does, a router plane is for cutting to depth with precise accuracy. They can be used to make the bottom of a table saw dado perfectly flat. They can fine tune a rabbet or a tenon. They are the perfect companion to many power tools with nearly unlimited uses.My version of the router plane is easy to make from a scrap of wood and some easy to find hardware. And unlike other homemade versions, this has a micro-adjuster to set the depth and shaving thickness.
Every workshop should have at least one saw bench. Not only is this an indispensable tool for sawing, it’s also a comfortable and portable workspace for chopping, boring and all sorts of other tasks. This version of the classic saw bench includes some extra features. For one thing, there’s a split that runs down the center to support both sides of the board while you rip down its length. There are holes for holdfasts to secure your work while you drill or chop sitting down. And it’s large enough to use as a step stool or an extra seat while shooting the breeze. But the best part is it can be built with some old construction lumber!