Follow our Facebook page for free woodworking goodness! - Stumpy Nubs Woodworking Journal is a multi-media publication designed for weekend woodworkers of all skill levels. Each issue contains a selection of articles and videos about woodworking techniques (hand and power tools), jigs and shop improvements, unique projects, skill building tutorials, tool reviews and quick tips.
There are lots of ways to cut miters, but most involve setting the angle of a guide or jig. If you set it imprecisely, you’ll have problems. Why not have a sled dedicated to the most common miter angle you use, 45-degrees?
This precise miter sled excels at cutting the parts for frames and boxes. The dual fences are reliably fixed at 45-degrees and they extend for long workpieces. There is a system of stops to make repeated cuts accurately, and a micro-adjuster to fine tune your project parts. It’s the best miter sled out there, in my opinion!
You may also purchase this as part of our three-sled set at discounted rate in the “table saw jigs” catagory of our project plans store.
Our deluxe project plans are more than just a set of dimensions. They include a comprehensive set of step-by-step instructions with dozens of photos and illustrations to walk you thorough the build.
You will NOT receive a paper plan. You will be sent a link to download a digital PDF document that is compatible with most computers and digital devices. You may print it yourself or take it to a printing service. We do not provide 3D Sketchup models or CNC G-code.
Quick View
This is the ultimate table saw improvement! Not only does it add a giant work area to your bench top or contractor style saw, it can be combined with some of our other homemade tools to create an entire workshop in a 4X8 foot area! There are also sixteen drawers, several storage shelves, and room for various other small machines. Add a bench top drill press and a mini lathe, you name it! (There's even a built in lumber rack, for goodness sake!)
Quick View
I designed a dovetail machine that can be made from wood, and has more features than most of the top of the line commercial versions. This machine is designed to be used with your router to make fast, even, beautiful through dovetail joints that look like you made them by hand. It is micro-adjustable so you can set how tight you want the joint to be, and it allows you to easily change the spacing and size of the tails and pins. It will also make sliding dovetail joints and router dadoes!
Quick View
These homemade spring clamps are easy to make, and cost almost nothing (assuming you have some scrap wood and rubber bands laying around.) They're great for light duty clamping, and make an excellent project for kids- just be sure to supervise while they use the band saw or scroll saw. The link below will provide you with patterns for a large and small version.
Quick View
This is a tool Stumpy has wanted for a long time, but just couldn't justify the $1,000 price tag for the commercial version! It's a hand held mortising machine designed for loose tenon joinery- which is a lot like traditional mortise and tenon joinery- but WAY faster and easier! Inspired by the Festool Domino, this homemade version is a lot easier to make than you'd think, and it has more uses than you'd imagine!
Quick View
Building box/finger joint jigs has become a bit of a hobby among some woodworkers, like marble machines or complex mouse traps. They are admittedly complicated, but fun to build and really useful tools. I've designed several, but this one is my favorite. It will cut any joint configuration you can imagine, without any complicated setup or attachments to swap around. You don't need a dado set to use it, though using one will speed up the process. It will cut a joint up to 18" wide, and is compatible with any 10-inch table saw.
Quick View
Andre Roubo was among the oldest of the old-timey woodworkers, and the unique drawings found in his eighteenth century book have inspired woodworkers for over 200 years. Stumpy has designed a version of this bench which is by far the easiest, least expensive version to make. You can build one without difficult joinery, and without compromises in strength and features, all from cheap construction lumber! It's big, beefy and full of all the features a hand tool woodworker, or even a power tool woodworker, would appreciate.
Quick View
This machine was born out of frustration! Stumpy had a cheap hand-held biscuit joiner that he picked up on a whim at Harbor Freight. The problem with cheap units like that is the difficulty that comes with making an accurately placed slot without the tool rocking out of position during the cut! So, like any good woodworker, Stumpy set out to find a solution. And the result is a bench top unit that can make a cheap tool into something easier to use than even the expensive hand-held versions. The Bench-top Biscuit Joiner is fast and accurate, inexpensive to build, and has dozens of uses. It's great for edge gluing boards, strengthening any butt joint, cutting slots for raised panels and picture frames... you name it!
Quick View
This lift features an improved tracking mechanism, adjustments are made from above the table using a 1 1/8" socket or wrench, it attaches to a homemade router plate, and will go into almost any router table that has a removable plate. Or you can use it by itself as a stand-alone mini router table! The plans are designed for a standard 3 1/2 - 3 3/4" round, removable router motor.
Quick View
This is a drill press table unlike anything you have ever seen before. Despite its compact profile, it is PACKED with features, including two drill bit storage drawers, a quick-release T-style fence, built in dust collection, replaceable inserts and a clever mechanism that allows the table surface to slide forward and back, as well as left to right! When combined with the built in stops, or simple layout lines on a piece of tape, this mechanism can make your drill press do a LOT more! Use it to make rows of holes for shelf pins, etc., all with easy repeatability. You can even put a router bit in the drill press and use the table for milling shallow mortises and inlays. You're bound to find even more uses for this unique table!
Quick View
It may look like a regular router table, but it has a feature that very few have! The front of the table surface slides in a precision track, and that makes all the difference. It's like having a built in coping sled for safely and accurately routing small parts or routing the end of narrow stock. You clamp your work piece right down to the table, then slide the carriage past the bit. It adds a level of safety and precision that no standard router table can match, and the uses are endless. Add to that the six drawers for bit and accessory storage and you have a router table that will do more things and last longer than any you've ever owned!
A truly unique digital publication for the everyday woodworker
support@stumpynubs.com
