Follow our Facebook page for free woodworking goodness! - Stumpy Nubs Woodworking Journal is a multi-media publication designed for weekend woodworkers of all skill levels. Each issue contains a selection of articles and videos about woodworking techniques (hand and power tools), jigs and shop improvements, unique projects, skill building tutorials, tool reviews and quick tips.
Tired of your crappy table saw fence? This one is truly unique with an innovative locking system that self squares to the blade, a micro adjuster for fine tuning your cuts, and an anti-kick-back European style with detachable extensions. Even the rails are made from wood! It’s designed to fit any saw from small, bench top units to large cabinet saws, with or without side tables. There’s even a built in pencil & accessory holder! (This project can be used on its own, but it is also designed to fit our deluxe table saw workstation,
Our deluxe project plans are more than just a set of dimensions. They include a comprehensive set of step-by-step instructions with dozens of photos and illustrations to walk you thorough the build.
You will NOT receive a paper plan. You will be sent a link to download a digital PDF document that is compatible with most computers and digital devices. You may print it yourself or take it to a printing service. We do not provide 3D Sketchup models or CNC G-code.
Quick View
These homemade spring clamps are easy to make, and cost almost nothing (assuming you have some scrap wood and rubber bands laying around.) They're great for light duty clamping, and make an excellent project for kids- just be sure to supervise while they use the band saw or scroll saw. The link below will provide you with patterns for a large and small version.
Quick View
If you use a lot of plywood or if you just like to keep a few sheets on hand, this is the project for you! It's a storage cart that organizes both full and partial sheets. But it also includes a clever feature that holds large panels upright so you may break them down easily with a circular saw and an edge guide. No more carrying and flipping big, heavy sheets around the shop. Do it all right on the storage cart! The whole thing is mobile so you can roll it around and tuck it in a corner. And it's built from inexpensive construction lumber.
Quick View
The Europeans have had a secret for years- their saws have sliding tops for easy and accurate crosscuts! We can buy attachments for our saws in the US, but they are EXPENSIVE. So why not make your own? This one mounts to the side of your contractor or cabinet saw (for smaller saws, use with the TS Workstation) and includes an adjustable miter fence, even a storage drawer. Great for working with plywood panels!
Quick View
Building box/finger joint jigs has become a bit of a hobby among some woodworkers, like marble machines or complex mouse traps. They are admittedly complicated, but fun to build and really useful tools. I've designed several, but this one is my favorite. It will cut any joint configuration you can imagine, without any complicated setup or attachments to swap around. You don't need a dado set to use it, though using one will speed up the process. It will cut a joint up to 18" wide, and is compatible with any 10-inch table saw.
Quick View
This amazingly accurate and versatile router table fence is patterned after the very expensive Incra LS system. It features a set of interlocking teeth creating positive stops every 1/16". You can't miss your mark even by the tiniest fraction of in inch! And when combined with Stumpy's "sliding router table" you can create precise joinery! It also works on any router table and is the most accurate homemade router fence out there.
Quick View
This may be the only clamp rack you ever need. It will hold between 20-40 clamps, depending on the type, including F-clamps, parallel clamps, pipe clamps, bar clamps or pistol grip clamps. Set up the rack according to the types you own now. If you get more of a different type later, the rack adjusts to always efficiently use the valuable wall space. And it only requires a half sheet of plywood!
Quick View
I designed a dovetail machine that can be made from wood, and has more features than most of the top of the line commercial versions. This machine is designed to be used with your router to make fast, even, beautiful through dovetail joints that look like you made them by hand. It is micro-adjustable so you can set how tight you want the joint to be, and it allows you to easily change the spacing and size of the tails and pins. It will also make sliding dovetail joints and router dadoes!
Quick View
This jig is simple and inexpensive to make, but well thought out to provide a surprising level of functionality. It may be used with a plunge router and an edge guide to create accurate, repeatable mortises. You can cut tricky ones too, such as double mortises, parallel mortises and even mortises in round stock.
Quick View
What started out as a way to safely hold small parts while working at the router table, became a multi-functional sled that will accomplish several tasks safely and accurately. It's a small parts holder: it's a coping sled for routing on the ends of narrow work pieces (rail and stile construction, tenons, half laps, etc.); and it's a circle cutting jig capable of diameters up to 10-inches.
This sled is surprisingly easy to build, and the plans give you all the information you need, including step-by-step instructions complete with photos. Enjoy!
Quick View
This is a great machine for cutting curves and large holes without having to cut from the edge of the work piece like with a band saw. In fact, it can replace a band saw in a budget-minded shop. PLUS, it can cut plastic, metal, even tile! Rockwell calls theirs a Blade-runner, but this one has features that even theirs doesn't have. For one thing, it makes beveled cuts. It has a storage drawer at the bottom, and it can be made from scraps and a cheap saw.
A truly unique digital publication for the everyday woodworker
support@stumpynubs.com
