It’s true- you can NEVER have enough clamps. But it’s also a little known fact- you can never have a big enough clamp rack! The problem is, a lot of small shops don’t have the wall space for a large selection of clamps. So Stumpy set out to make a compact solution that would hold a lot of clamps in a little space.
This clamp rack has three layers which open like cabinet doors. It will hold 48 clamps, enough for even the biggest glue-ups! But the best part is that those clamps can now be stored in just a 3X2′ space on your shop wall! It will fit regular twist bar clamps as well as the one handed ratcheting bar clamps. The same principal can also be adapted to hold pipe clamps.
This basic plan includes a dimensioned cut list and simple drawings so you can see how it goes together. I recommend you also watch the free videos below for additional tips.
- Basic PDF Plans (dimensions, cut list and basic assembly drawings)
- Dimensions: Inches
- Tools required: Circular saw, drill, router
You will NOT receive a paper plan. You will be sent a link to download a digital PDF document that is compatible with most computers and digital devices. You may print it yourself or take it to a printing service. We do not provide 3D Sketchup models or CNC G-code.
Returns and ExchangesThere are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.
- You have 14 calendar days to return an item from the date you received it.
- Only items that have been purchased directly from Us.
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to UsFirstly Print and return this Returns Form to: 30 South Park Avenue, San Francisco, CA 94108, USA Please remember to ensure that the item you are returning is repackaged with all elements. For more information, view our full Returns and Exchanges information.
This rack was created with that in mind. It is designed to evolve with your collection. Not only can you move the bits around, you can also move the holes! This makes it possible to group bits by type, to add more places for 1/4-inch or 1/2-inch shaft bits, and each bit holder is removable so you may keep the bit protected when you take it to your bench or router table. This may be the last bit rack you ever build!
These two jigs are easy to make, and simple to use. One is for the router table, the other is used with a hand-held router. Both will cut through-dovetail pins (the tails are cut with a band saw, scroll saw or jig saw). The hand-held router jig will also enable you to cut half-blind dovetails as well. Both jigs are demonstrated in the videos below, and there's another video about laying out your joints.
This tenon jig is yet another example of how you can use a homemade incremental positioner in amazing ways! It provides a positive stop every 1/6" (which can be micro-adjusted to the tiniest amount), making it impossible to set up the jig wrong, and making it easy to make many tenons that are all exactly the same size without laying them out individually. The accuracy and repeatability of this jig is unique in any homemade or even store-bought version- just check out the video below to see! But the best part is, it's inexpensive and easy to make using our detailed plans, complete with lots of photos and step-by-step instructions!
This lift features an improved tracking mechanism, adjustments are made from above the table using a 1 1/8" socket or wrench, it attaches to a homemade router plate, and will go into almost any router table that has a removable plate. Or you can use it by itself as a stand-alone mini router table! The plans are designed for a standard 3 1/2 - 3 3/4" round, removable router motor.
It may look like a regular router table, but it has a feature that very few have! The front of the table surface slides in a precision track, and that makes all the difference. It's like having a built in coping sled for safely and accurately routing small parts or routing the end of narrow stock. You clamp your work piece right down to the table, then slide the carriage past the bit. It adds a level of safety and precision that no standard router table can match, and the uses are endless. Add to that the six drawers for bit and accessory storage and you have a router table that will do more things and last longer than any you've ever owned!
This drum sander design is unlike anything you've ever seen before! It is a "dual stage" machine, meaning both the top and the bottom of the sanding drum may be used. This enables you to sand any flat work piece to thickness by feeding it through the machine via a hand-cranked feed belt, OR you can pass your work pieces over the top of the machine for fast sanding of flat surfaces and even edges! There isn't another drum sander with this capability ANYWHERE! It's also designed to use inexpensive, easy to find 6" sanding belts, and rather than peeling off the paper to change grits, you swap out the whole drum via a quick-release system!
This machine was born out of frustration! Stumpy had a cheap hand-held biscuit joiner that he picked up on a whim at Harbor Freight. The problem with cheap units like that is the difficulty that comes with making an accurately placed slot without the tool rocking out of position during the cut! So, like any good woodworker, Stumpy set out to find a solution. And the result is a bench top unit that can make a cheap tool into something easier to use than even the expensive hand-held versions. The Bench-top Biscuit Joiner is fast and accurate, inexpensive to build, and has dozens of uses. It's great for edge gluing boards, strengthening any butt joint, cutting slots for raised panels and picture frames... you name it!
This is the ultimate table saw improvement! Not only does it add a giant work area to your bench top or contractor style saw, it can be combined with some of our other homemade tools to create an entire workshop in a 4X8 foot area! There are also sixteen drawers, several storage shelves, and room for various other small machines. Add a bench top drill press and a mini lathe, you name it! (There's even a built in lumber rack, for goodness sake!)
This is a drill press table unlike anything you have ever seen before. Despite its compact profile, it is PACKED with features, including two drill bit storage drawers, a quick-release T-style fence, built in dust collection, replaceable inserts and a clever mechanism that allows the table surface to slide forward and back, as well as left to right! When combined with the built in stops, or simple layout lines on a piece of tape, this mechanism can make your drill press do a LOT more! Use it to make rows of holes for shelf pins, etc., all with easy repeatability. You can even put a router bit in the drill press and use the table for milling shallow mortises and inlays. You're bound to find even more uses for this unique table!
A mini cyclone designed to keep your filter clean and your vacuum working hard! There are commercial versions on the market, but ours is easy and inexpensive to make, and will mount directly on your vacuum so you don't have to pull a separate bucket around. Vacuum surgery is optional, and we walk you through the whole thing! This project was featured on episodes 51 & 52 of "The Stumpy Nubs Workshop".