Have a lot of shelf pin holes to drill? Want a large, bench top machine that allows you to drill two rows at once, without messing with clamps to keep it in place? This is a jig unlike any other!
The work piece slides inside the jig, rather than clamping the jig onto the work piece. A turn of a crank is all you have to do to secure it in place. The template on top allows you to drill a hole every second in stock of any thickness and up to a foot wide. Jobs like cabinets and small bookcases won’t require re-positioning at all, you can do both rows of holes at once. Longer work pieces are easier than ever to do because you don’t have to remove the jig to re-position, you simply loosen the crank and slide the board!
- Basic PDF Plans (dimensions, cut list and basic assembly drawings)
- Dimensions: Inches
- Tools required: Circular saw, drill, router
You will NOT receive a paper plan. You will be sent a link to download a digital PDF document that is compatible with most computers and digital devices. You may print it yourself or take it to a printing service. We do not provide 3D Sketchup models or CNC G-code.
Returns and ExchangesThere are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.
- You have 14 calendar days to return an item from the date you received it.
- Only items that have been purchased directly from Us.
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to UsFirstly Print and return this Returns Form to: 30 South Park Avenue, San Francisco, CA 94108, USA Please remember to ensure that the item you are returning is repackaged with all elements. For more information, view our full Returns and Exchanges information.
A mini cyclone designed to keep your filter clean and your vacuum working hard! There are commercial versions on the market, but ours is easy and inexpensive to make, and will mount directly on your vacuum so you don't have to pull a separate bucket around. Vacuum surgery is optional, and we walk you through the whole thing! This project was featured on episodes 51 & 52 of "The Stumpy Nubs Workshop".
This easy to build jig makes it possible to create traditional raised panels on the router table without any special bits. All you need is a simple straight router bit, and the results are quick, easy and repeatable.
These homemade spring clamps are easy to make, and cost almost nothing (assuming you have some scrap wood and rubber bands laying around.) They're great for light duty clamping, and make an excellent project for kids- just be sure to supervise while they use the band saw or scroll saw. The link below will provide you with patterns for a large and small version.
Router planes are amazing tools, but they are also largely misunderstood. And that's a shame, because they are extremely useful in both a hand-tool and a power-tool workshop. Rather than cutting profiles, as a modern router does, a router plane is for cutting to depth with precise accuracy. They can be used to make the bottom of a table saw dado perfectly flat. They can fine tune a rabbet or a tenon. They are the perfect companion to many power tools with nearly unlimited uses.
My version of the router plane is easy to make from a scrap of wood and some easy to find hardware. And unlike other homemade versions, this has a micro-adjuster to set the depth and shaving thickness.
If you use a lot of plywood or if you just like to keep a few sheets on hand, this is the project for you! It's a storage cart that organizes both full and partial sheets. But it also includes a clever feature that holds large panels upright so you may break them down easily with a circular saw and an edge guide. No more carrying and flipping big, heavy sheets around the shop. Do it all right on the storage cart! The whole thing is mobile so you can roll it around and tuck it in a corner. And it's built from inexpensive construction lumber.
Every workshop should have at least one saw bench. Not only is this an indispensable tool for sawing, it’s also a comfortable and portable workspace for chopping, boring and all sorts of other tasks. This version of the classic saw bench includes some extra features. For one thing, there’s a split that runs down the center to support both sides of the board while you rip down its length. There are holes for holdfasts to secure your work while you drill or chop sitting down. And it’s large enough to use as a step stool or an extra seat while shooting the breeze. But the best part is it can be built with some old construction lumber!
This is a drill press table unlike anything you have ever seen before. Despite its compact profile, it is PACKED with features, including two drill bit storage drawers, a quick-release T-style fence, built in dust collection, replaceable inserts and a clever mechanism that allows the table surface to slide forward and back, as well as left to right! When combined with the built in stops, or simple layout lines on a piece of tape, this mechanism can make your drill press do a LOT more! Use it to make rows of holes for shelf pins, etc., all with easy repeatability. You can even put a router bit in the drill press and use the table for milling shallow mortises and inlays. You're bound to find even more uses for this unique table!
This fence is truly unique with an innovative locking system that self squares to the blade, a micro adjuster for fine tuning your cuts, and an anti-kick-back European style with detachable extensions. Even the rails are made from wood! It's designed to fit any saw from small, bench top units to large cabinet saws, with or without side tables. There's even a built in pencil & accessory holder! (This project can be used on its own, but it is also designed to fit our deluxe table saw workstation)
I designed a dovetail machine that can be made from wood, and has more features than most of the top of the line commercial versions. This machine is designed to be used with your router to make fast, even, beautiful through dovetail joints that look like you made them by hand. It is micro-adjustable so you can set how tight you want the joint to be, and it allows you to easily change the spacing and size of the tails and pins. It will also make sliding dovetail joints and router dadoes!
Andre Roubo was among the oldest of the old-timey woodworkers, and the unique drawings found in his eighteenth century book have inspired woodworkers for over 200 years. Stumpy has designed a version of this bench which is by far the easiest, least expensive version to make. You can build one without difficult joinery, and without compromises in strength and features, all from cheap construction lumber! It's big, beefy and full of all the features a hand tool woodworker, or even a power tool woodworker, would appreciate.