Quick-Tips

5 of the BEST tips I’ve learned in woodworking!

Posted on September 22, 2021 at 8:41 pm by Jim Hamiltion / Quick-Tips

You will definitely use these five great tips!

Five of My Favorite Weekend Woodworking TIPS!

Posted on August 2, 2021 at 6:12 pm by Jim Hamiltion / Quick-Tips

Five weekend wooodworking tips

Building real furniture with UNDER $100 in tools!

Posted on May 20, 2021 at 5:19 pm by Jim Hamiltion / Other Tutorials, Quick-Tips, Workshop Improvements

Build real furniture with power tools and supplies all for under $100!

How a stick saved my hand from a chop saw!

Posted on May 12, 2021 at 8:46 pm by Jim Hamiltion / Misc. Tool Tutorials, Quick-Tips, Shop Safety

This inexpensive safety device saved my hand and you should have one too!

DIY floating wall shelves built differently

Posted on May 4, 2021 at 7:32 pm by Jim Hamiltion / Other Tutorials, Quick-Tips

Watch this unique process and pick up some tips for all sorts of future woodworking projects!

I destroy a chisel to see if the Tormek is too slow

Posted on March 9, 2021 at 7:54 pm by Jim Hamiltion / Quick-Tips, Sharpening

Are wet grinders too slow? Let’s find out…

Are table saws becoming obsolete?????

Posted on February 1, 2021 at 6:39 pm by Jim Hamiltion / Quick-Tips, Table Saw Tutorials

Can you do it all with other tools and skip the big, expensive table saw? NOT SO FAST…

CAUGHT ON TAPE: Table saw bevel kickback goes through wall- WHAT HAPPENED???

Posted on December 29, 2020 at 8:47 pm by Jim Hamiltion / Quick-Tips, Shop Safety, Table Saw Tutorials

A kickback while cutting a bevel on the table saw goes through my wall- how to prevent it in the future.

PROBLEM SOLVED: How to make CURVED tenon shoulders

Posted on December 23, 2020 at 8:41 pm by Jim Hamiltion / Joinery, Quick-Tips

Another problem we encountered while building a dog crate-end table, and the creative way we solved it.

How to bend a piece of 3/4-inch plywood

Posted on December 9, 2020 at 8:34 pm by Jim Hamiltion / Quick-Tips, Wood & Material Tutorials

How we solved a unique problem in a recent project and the lessons you can learn from it

CHEAP and EASY three-Minute finger/box joint jig

Posted on December 4, 2020 at 7:17 pm by Jim Hamiltion / Joinery, Quick-Tips, Table Saw Tutorials

It’s cheap, fast and easy to build, and it works flawlessly! NOTE: Scroll to the bottom of this page to watch a video version of this tutorial and to find links to things mentioned in the video. Transcript coming soon… LINKS WORTH CHECKING OUT: When you use this link to…

Precisely micro-adjusting your router table fence (Free jig!)

Posted on October 5, 2020 at 7:59 pm by Jim Hamiltion / Quick-Tips, Router Tutorials

Some quick tips and a homemade jig!

Edge-Guide Stop Blocks

Posted on September 29, 2020 at 6:28 pm by Jim Hamiltion / Quick-Tips, Router Tutorials

A quick and simple modification to your router edge guide

Are you cleaning your paint brushes wrong?

Posted on September 28, 2020 at 6:42 pm by Jim Hamiltion / Finishing, Quick-Tips

A tutorial for cleaning up oil-based woodworking finishes so your brushes will last longer.

DIY Table Saw Fence Caddy Keeps Your Gear Near

Posted on September 15, 2020 at 8:17 pm by Jim Hamiltion / Quick-Tips, Table Saw Tutorials

Keep your measuring tape, push blocks and other important stuff were you can reach it while you use the table saw!

Table Saw Blade Guard Myths BUSTED!

Posted on September 14, 2020 at 7:54 pm by Jim Hamiltion / Quick-Tips, Shop Safety, Table Saw Tutorials

Five myths about blade guards that might put your fingers at risk!

Miter saw blade on the table saw- DANGEROUS????

Posted on September 2, 2020 at 7:21 pm by Jim Hamiltion / Quick-Tips, Table Saw Tutorials

Some say it’s dangerous to use a negative hook blade on a table saw. Here’s everything you need to know about them…

My table saw blade won’t tilt far enough! (How to cut acute bevels)

Posted on August 31, 2020 at 6:47 pm by Jim Hamiltion / Quick-Tips, Table Saw Tutorials, Uncategorized

When 45 degrees aren’t enough, here’s how to do it the safe way!

Some clever ways to hold your work in a modern workshop

Posted on August 10, 2020 at 6:02 pm by Jim Hamiltion / Misc. Tool Tutorials, Quick-Tips, Workshop Improvements

Unleash the power of the t-track!

Why don’t we all use 10-inch dado sets on our 10-inch saws?

Posted on August 4, 2020 at 6:18 pm by Jim Hamiltion / Quick-Tips, Table Saw Tutorials

Should you use a 6, an 8 or a 10-inch set?

A clever table saw push-block idea for cutting thin strips

Posted on July 26, 2020 at 7:46 pm by Jim Hamiltion / Quick-Tips, Shop Safety

It’s safe, easy and cheap to make- Can’t beat that!

Why I won’t buy ultra-fine diamond sharpening stones

Posted on July 21, 2020 at 8:04 pm by Jim Hamiltion / Quick-Tips, Sharpening

Diamond stones are great up to about 1000 grit. Then everything changes…

What you need to know about your woodworking router’s speed

Posted on June 23, 2020 at 7:34 pm by Jim Hamiltion / Quick-Tips, Router Tutorials

Speed affects safety and cut quality, but feed rate is a factor too…

How to accurately set your table saw bevel angle

Posted on June 18, 2020 at 8:14 pm by Jim Hamiltion / Quick-Tips, Table Saw Tutorials

Some quick tips that will save you the hassles of poor bevel cuts.

Right Tilt vs. Left Tilt Table Saws- Does it matter?

Posted on June 9, 2020 at 8:46 pm by Jim Hamiltion / Quick-Tips, Table Saw Tutorials

A quick explanation of the difference and how the blade tilt direction can affect safe saw usage.

Homemade stop block for better picture frame miters

Posted on June 8, 2020 at 8:54 pm by Jim Hamiltion / Joinery, Quick-Tips

Homemade stop block for better picture frame miters

Most woodworking benches are the wrong height! Is yours?

Posted on May 23, 2020 at 7:38 pm by Jim Hamiltion / Old-Timey Woodworking, Quick-Tips, Workshop Improvements

The secret formula for the perfect workbench height.

An important lesson I learned while installing a door frame

Posted on May 12, 2020 at 7:31 pm by Jim Hamiltion / Quick-Tips

Sometimes it’s best to stand back and let someone else work!

How to use a combination square as a router edge guide

Posted on May 8, 2020 at 7:30 pm by Jim Hamiltion / Misc. Tool Tutorials, Quick-Tips

In under a minute you’ll learn a clever trick.

Are you setting up your dado stack wrong? (Some clever tips)

Posted on April 25, 2020 at 8:25 pm by Jim Hamiltion / Quick-Tips, Table Saw Tutorials

Even old pros will learn something from these tips!

Do you cut miters uphill or downhill? (and a jig)

Posted on April 22, 2020 at 8:37 pm by Jim Hamiltion / Quick-Tips

Don’t forget, you have two miter slots. Use them!

The best dados- Table Saw vs. Router?

Posted on April 20, 2020 at 6:01 pm by Jim Hamiltion / Joinery, Quick-Tips, Router Tutorials, Table Saw Tutorials

Let’s end this debate once and for all! Three ways to do it, lots of tips along the way.

A clever way to safely cut thin strips on the table saw

Posted on April 18, 2020 at 6:44 pm by Jim Hamiltion / Quick-Tips, Shop Safety, Table Saw Tutorials, Wood & Material Tutorials

Safe, accurate, repeatable, and you probably already have everything you need to do it!

How to NOT screw up a hinge mortise with a router.

Posted on April 10, 2020 at 7:18 pm by Jim Hamiltion / Quick-Tips, Router Tutorials

Some great mortising tips you may never have known about!

How to Fix a Dovetail Joint

Posted on March 20, 2020 at 6:36 pm by Jim Hamiltion / Joinery, Old-Timey Woodworking, Quick-Tips

It’s not a big deal if you miscut, you may be able to repair it in a snap!

Bondo is a lifesaver for woodworkers!

Posted on March 12, 2020 at 6:55 pm by Jim Hamiltion / Quick-Tips, Wood & Material Tutorials

Body filler can get you out of some jams. It’s not just for covering the crap!

Six Tips To Make Your Table Saw Rip Better!

Posted on March 6, 2020 at 7:07 pm by Jim Hamiltion / Quick-Tips

Troubleshooting your table saw rip cutting problems- 6 ways to fix it!

The PROPER way to make repeat cuts on the table saw!

Posted on March 3, 2020 at 7:21 pm by Jim Hamiltion / Quick-Tips, Table Saw Tutorials

Using the right stop blocks can make a BIG difference!

8 Things to do before you use your table saw again

Posted on March 2, 2020 at 7:41 pm by Jim Hamiltion / Quick-Tips, Shop Safety, Table Saw Tutorials

If it’s been awhile, you need to check these things before you get that saw back out!

Introducing the amazing SQUIGGLE WOOD maker!

Posted on February 25, 2020 at 7:48 pm by Jim Hamiltion / Quick-Tips

Bendable wooden springs made by the most precise, hand powered table saw you have ever seen! What else may be possible?

Trace-Coat Before You Finish

Posted on February 24, 2020 at 1:33 pm by Jim Hamiltion / Finishing, Quick-Tips

Identify potential problems before it’s too late.

Choosing gloves for wood finishing

Posted on February 20, 2020 at 2:10 pm by Jim Hamiltion / Finishing, Quick-Tips, Shop Safety

What you don’t know CAN hurt you!

Remove a wide board’s heart

Posted on January 29, 2020 at 2:17 pm by Jim Hamiltion / Quick-Tips, Wood & Material Tutorials

How a simple operation can prevent cupping

Cordless Drills vs. Impact Drivers

Posted on January 28, 2020 at 2:22 pm by Jim Hamiltion / Misc. Tool Tutorials, Quick-Tips

Know what to use when, or suffer the consequences!

A Dangerous Router Table Cut

Posted on January 26, 2020 at 2:26 pm by Jim Hamiltion / Quick-Tips, Router Tutorials, Shop Safety

How you can get in trouble before you know you’re doing something wrong!

Why do boards cup AWAY from the center of a tree?

Posted on January 21, 2020 at 8:05 pm by Jim Hamiltion / Quick-Tips, Wood & Material Tutorials

How a simple paper fan explains everything about wood warping.

DOH! I made a woodworking mistake! How do I fix it?

Posted on January 20, 2020 at 8:35 pm by Jim Hamiltion / Quick-Tips

Everybody messes up- don’t worry, you can patch it!

Someday you’ll need to laminate a counter top.

Posted on January 19, 2020 at 8:39 pm by Jim Hamiltion / Quick-Tips

Some useful tips for when your friend/family member asks for your help.

What kind of moron carpets a woodworking shop floor????

Posted on January 15, 2020 at 8:51 pm by Jim Hamiltion / Quick-Tips, Workshop Improvements

It’s not as dumb as you think! Let me make the case…

OOPS! I need to make a forstner bit hole bigger!

Posted on January 13, 2020 at 6:03 pm by Jim Hamiltion / Quick-Tips

It’s harder than it sounds, but easier than it looks

← Older Posts

Recent Posts

Find us on Social Media

Woodworkers Are Saying

About Company

Contact information

FREE TUTORIALS

NAVIGATION

PLANS

Find us online

Search