Stop sawdust boogers forever! This downdraft table is an all in one solution for a small shop with a big 20″ X 30″ work surface complete with an embedded t-track holding system. Not only will it tame the sawdust, it has countless other uses for securing your workpieces with clamps, stops, risers and hold downs for sanding, cutting, routing carving… the list goes on and on! (This project can be used on its own, but it is also designed to fit our deluxe table saw workstation)
- Deluxe PDF Plans (Dimensions, cut list, drawings, build photos and step by step instructions)
- Dimensions: Inches
- Tools required: Table saw, pneumatic nailer, drill, router
More about our deluxe plans:
Our deluxe project plans are more than just a set of dimensions. They include a comprehensive set of step-by-step instructions with dozens of photos and illustrations to walk you thorough the build.
You will NOT receive a paper plan. You will be sent a link to download a digital PDF document that is compatible with most computers and digital devices. You may print it yourself or take it to a printing service. We do not provide 3D Sketchup models or CNC G-code.
Below are some examples of what our deluxe project plans look like. This plan will be similar.
Returns and ExchangesThere are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.
- You have 14 calendar days to return an item from the date you received it.
- Only items that have been purchased directly from Us.
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to UsFirstly Print and return this Returns Form to: 30 South Park Avenue, San Francisco, CA 94108, USA Please remember to ensure that the item you are returning is repackaged with all elements. For more information, view our full Returns and Exchanges information.
Andre Roubo was among the oldest of the old-timey woodworkers, and the unique drawings found in his eighteenth century book have inspired woodworkers for over 200 years. Stumpy has designed a version of this bench which is by far the easiest, least expensive version to make. You can build one without difficult joinery, and without compromises in strength and features, all from cheap construction lumber! It's big, beefy and full of all the features a hand tool woodworker, or even a power tool woodworker, would appreciate.
Every workshop should have at least one saw bench. Not only is this an indispensable tool for sawing, it’s also a comfortable and portable workspace for chopping, boring and all sorts of other tasks. This version of the classic saw bench includes some extra features. For one thing, there’s a split that runs down the center to support both sides of the board while you rip down its length. There are holes for holdfasts to secure your work while you drill or chop sitting down. And it’s large enough to use as a step stool or an extra seat while shooting the breeze. But the best part is it can be built with some old construction lumber!
This horizontal router has a few unique twists that make all the difference, like a tilting table, a micro adjustable router lift, a sliding table and much more. The machine is great for making raised panel doors, cutting miters and bevels, making splined miter joints for boxes, locking miter joints, half lap joints, rabbets, tenons... the list goes on and on. Plus it has excellent dust collection, and the tilting table makes it possible to cut unique, one of a kind profiles with ordinary router bits!
The Europeans have had a secret for years- their saws have sliding tops for easy and accurate crosscuts! We can buy attachments for our saws in the US, but they are EXPENSIVE. So why not make your own? This one mounts to the side of your contractor or cabinet saw (for smaller saws, use with the TS Workstation) and includes an adjustable miter fence, even a storage drawer. Great for working with plywood panels!
A mini cyclone designed to keep your filter clean and your vacuum working hard! There are commercial versions on the market, but ours is easy and inexpensive to make, and will mount directly on your vacuum so you don't have to pull a separate bucket around. Vacuum surgery is optional, and we walk you through the whole thing! This project was featured on episodes 51 & 52 of "The Stumpy Nubs Workshop".
This lift features an improved tracking mechanism, adjustments are made from above the table using a 1 1/8" socket or wrench, it attaches to a homemade router plate, and will go into almost any router table that has a removable plate. Or you can use it by itself as a stand-alone mini router table! The plans are designed for a standard 3 1/2 - 3 3/4" round, removable router motor.