This is the larger of three table homemade saw sleds I use in my shop. I call it the “Mega Sled” because it will do it all including crosscutting large panels and cutting various types of joinery.
It includes plans for a clever system of joinery jig attachments including a finger joint jig, a pair of dovetail jigs, a tenon-cutting jig, a jig for cutting spline slots to reinforce frames and boxes, and spring activated micro-adjusters to fine tune your cuts. It is by far the most capable table saw sled system around!
This large sled will work on any contractor’s table saw or cabinet saw. It will also work on many portable jobsite saws. It may be too large for some small benchtop saws. We offer a smaller version of this sled, complete with all the same attachments in our web store.
You may also purchase this sled, our smaller version (for day-to-day work) and our special miter sled (for 45-degree frames and boxes) as a set at a discounted rate in the “table saw jigs” catagory of our project plans store.
- Deluxe PDF Plans (Dimensions, cut list, drawings, build photos and step by step instructions)
- Dimensions: Inches
- Tools required: Table saw, pneumatic nailer, drill, router
Mega Sled Overview:
Jig Attachments Overview:
How to use the finger joint jig attachment:
How to use the tenon jig attachment:
How to use the dovetail jig attachments:
How to make and adjust the runners:
More about our deluxe plans:
Our deluxe project plans are more than just a set of dimensions. They include a comprehensive set of step-by-step instructions with dozens of photos and illustrations to walk you thorough the build.
You will NOT receive a paper plan. You will be sent a link to download a digital PDF document that is compatible with most computers and digital devices. You may print it yourself or take it to a printing service. We do not provide 3D Sketchup models or CNC G-code.
Below are some examples of what our deluxe project plans look like. This plan will be similar.
Returns and ExchangesThere are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.
- You have 14 calendar days to return an item from the date you received it.
- Only items that have been purchased directly from Us.
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to UsFirstly Print and return this Returns Form to: 30 South Park Avenue, San Francisco, CA 94108, USA Please remember to ensure that the item you are returning is repackaged with all elements. For more information, view our full Returns and Exchanges information.
This machine was born out of frustration! Stumpy had a cheap hand-held biscuit joiner that he picked up on a whim at Harbor Freight. The problem with cheap units like that is the difficulty that comes with making an accurately placed slot without the tool rocking out of position during the cut! So, like any good woodworker, Stumpy set out to find a solution. And the result is a bench top unit that can make a cheap tool into something easier to use than even the expensive hand-held versions. The Bench-top Biscuit Joiner is fast and accurate, inexpensive to build, and has dozens of uses. It's great for edge gluing boards, strengthening any butt joint, cutting slots for raised panels and picture frames... you name it!
Building box/finger joint jigs has become a bit of a hobby among some woodworkers, like marble machines or complex mouse traps. They are admittedly complicated, but fun to build and really useful tools. I've designed several, but this one is my favorite. It will cut any joint configuration you can imagine, without any complicated setup or attachments to swap around. You don't need a dado set to use it, though using one will speed up the process. It will cut a joint up to 18" wide, and is compatible with any 10-inch table saw.
This amazingly accurate and versatile router table fence is patterned after the very expensive Incra LS system. It features a set of interlocking teeth creating positive stops every 1/16". You can't miss your mark even by the tiniest fraction of in inch! And when combined with Stumpy's "sliding router table" you can create precise joinery! It also works on any router table and is the most accurate homemade router fence out there.
Andre Roubo was among the oldest of the old-timey woodworkers, and the unique drawings found in his eighteenth century book have inspired woodworkers for over 200 years. Stumpy has designed a version of this bench which is by far the easiest, least expensive version to make. You can build one without difficult joinery, and without compromises in strength and features, all from cheap construction lumber! It's big, beefy and full of all the features a hand tool woodworker, or even a power tool woodworker, would appreciate.
Traditional workbenches are great! The problem is that planning and project assembly tasks are best done at a low bench, but cutting joinery such as dovetails is more comfortable at a higher bench. Most shops don’t have multiple benches for multiple uses, so we bend down for our dovetailing.
This workstation seeks to solve that problem! When placed on a standard bench top it raises your work up so you can stand erect and work more comfortably. It includes work-holding clamps so it may be used on any work-surface, no vice required. And other clever features, such as a drawer to hold all your dovetailing tools and a replaceable chopping surface, make it very versatile.
These two jigs are easy to make, and simple to use. One is for the router table, the other is used with a hand-held router. Both will cut through-dovetail pins (the tails are cut with a band saw, scroll saw or jig saw). The hand-held router jig will also enable you to cut half-blind dovetails as well. Both jigs are demonstrated in the videos below, and there's another video about laying out your joints.
This is my version of an idea first presented in Fine Woodworking Magazine (Issue #178) by Richard Beebe. This taper jig works like a sled, securely holding your workpiece and keeping your hands safe throughout the cut, even for narrow tapers, such as chair legs. My version is a little different that his. It adjusts equally from both ends of the fence, and will cut wide panels as well as narrow stock.
This is a tool Stumpy has wanted for a long time, but just couldn't justify the $1,000 price tag for the commercial version! It's a hand held mortising machine designed for loose tenon joinery- which is a lot like traditional mortise and tenon joinery- but WAY faster and easier! Inspired by the Festool Domino, this homemade version is a lot easier to make than you'd think, and it has more uses than you'd imagine!
What started out as a way to safely hold small parts while working at the router table, became a multi-functional sled that will accomplish several tasks safely and accurately. It's a small parts holder: it's a coping sled for routing on the ends of narrow work pieces (rail and stile construction, tenons, half laps, etc.); and it's a circle cutting jig capable of diameters up to 10-inches.
This sled is surprisingly easy to build, and the plans give you all the information you need, including step-by-step instructions complete with photos. Enjoy!
This easy to build jig makes it possible to create traditional raised panels on the router table without any special bits. All you need is a simple straight router bit, and the results are quick, easy and repeatable.