Showing all 18 results
Andre Roubo was among the oldest of the old-timey woodworkers, and the unique drawings found in his eighteenth century book have inspired woodworkers for over 200 years. Stumpy has designed a version of this bench which is by far the easiest, least expensive version to make. You can build one without difficult joinery, and without compromises in strength and features, all from cheap construction lumber! It's big, beefy and full of all the features a hand tool woodworker, or even a power tool woodworker, would appreciate.
This drum sander design is unlike anything you've ever seen before! It is a "dual stage" machine, meaning both the top and the bottom of the sanding drum may be used. This enables you to sand any flat work piece to thickness by feeding it through the machine via a hand-cranked feed belt, OR you can pass your work pieces over the top of the machine for fast sanding of flat surfaces and even edges! There isn't another drum sander with this capability ANYWHERE! It's also designed to use inexpensive, easy to find 6" sanding belts, and rather than peeling off the paper to change grits, you swap out the whole drum via a quick-release system!
This workstation does it all. It begins with the t-track embedded top (which you can buy or make) that provides endless possibilities for work holding, tool mounting and more. Lift the top and slide it behind the cabinet using the innovative, spring-loaded tracking system and you reveal a downdraft sanding station. When you aren't using the workstation it is designed to serve as a table saw out-feed table. Did I mention the pull-out platform that nearly doubles the work surface, and the ample storage?
It's true- you can NEVER have enough clamps. But it's also a little known fact- you can never have a big enough clamp rack! The problem is, a lot of small shops don't have the wall space for a large selection of clamps. So Stumpy set out to make a compact solution that would hold a lot of clamps in a little space.
This clamp rack has three layers which open like cabinet doors. It will hold 48 clamps, enough for even the biggest glue-ups! But the best part is that those clamps can now be stored in just a 3X2' space on your shop wall! It will fit regular twist bar clamps as well as the one handed ratcheting bar clamps. The same principal can also be adapted to hold pipe clamps.
Every workshop should have at least one saw bench. Not only is this an indispensable tool for sawing, it’s also a comfortable and portable workspace for chopping, boring and all sorts of other tasks. This version of the classic saw bench includes some extra features. For one thing, there’s a split that runs down the center to support both sides of the board while you rip down its length. There are holes for holdfasts to secure your work while you drill or chop sitting down. And it’s large enough to use as a step stool or an extra seat while shooting the breeze. But the best part is it can be built with some old construction lumber!
A mini cyclone designed to keep your filter clean and your vacuum working hard! There are commercial versions on the market, but ours is easy and inexpensive to make, and will mount directly on your vacuum so you don't have to pull a separate bucket around. Vacuum surgery is optional, and we walk you through the whole thing! This project was featured on episodes 51 & 52 of "The Stumpy Nubs Workshop".
Stop sawdust boogers forever! This downdraft table is an all in one solution for a small shop with a big 20" X 30" work surface complete with an embedded t-track holding system. Not only will it tame the sawdust, it has countless other uses for securing your workpieces with clamps, stops, risers and hold downs for sanding, cutting, routing carving... the list goes on and on!
This is the ultimate table saw improvement! Not only does it add a giant work area to your bench top or contractor style saw, it can be combined with some of our other homemade tools to create an entire workshop in a 4X8 foot area! There are also sixteen drawers, several storage shelves, and room for various other small machines. Add a bench top drill press and a mini lathe, you name it! (There's even a built in lumber rack, for goodness sake!)